XJH360-10T Punch-style Depaneling Machine.png-Punching-XonJe Intelligent Technology Co.,LTD

XJH360-10T Punch-style Depaneling Machine.png

Features

Adopts a fast booster cylinder design, ensuring high-speed performance.
Compact structural design with superior rigidity, facilitating ease of operation and safe use.
Supports interchangeable molds for different products, with convenient and simple mold replacement.
Lower mold moves in and out automatically for easy product loading and unloading. Finished products can be collected in a built-in drawer.
Minimizes internal stress generated during board cutting, effectively preventing component solder cracking.
Delivers exceptionally high efficiency in punching and cutting PCBA and FPC aluminum substrates.
Controlled by PLC and equipped with a human-machine interface. Supports both Chinese and English display, with alarm functions including counting and air pressure detection.

Solution

Parameter	XJH360-10T	XJH360-15T
Model	XJH360-10T	XJH360-15T
Valid Cutting Size	250*350mm	350*550mm
Stamping Method	High Speed Turbocharged Type	High Speed Turbocharged Type
Equipment Output	10 Tons Of Output	15 Tons Of Output
Scope Of Application	Suitable For Fpc Depaneling, Stamp-hole Pcb Depaneling, And Aluminum Substrate/copper substrate cutting	Suitable For Fpc Depaneling, Stamp-hole Pcb Depaneling, And Aluminum Substrate/copper substrate cutting
Minimum Distance Between Parts And Cutting Position	≥ 0.5mm	≥ 0.5mm
Partition Efficiency	12s/pcs Whole Panel	12s/pcs Whole Panel
Operational Protection	Safety Light Curtain, safety Door, two-handed Operation Start Button	Safety Light Curtain, safety Door, two-handed Operation Start Button
FPC Cutting Position	Components Are Not Allowed To Straddle The Cutting Point	Components Are Not Allowed To Straddle The Cutting Point
Positioning Hole Requirements	More Than Four Positioning Holes, An Additional Foolproof Hole Shall Be Provided	More Than Four Positioning Holes, An Additional Foolproof Hole Shall Be Provided
Maximum Height Of Components On FPC Board	The Maximum Height Of Components On The Reverse Side Of The Pcb Is 20mm, And The Maximum Height Of Components On The Front Side Is 35mm	The Maximum Height Of Components On The Reverse Side Of The Pcb Is 20mm, And The Maximum Height Of Components On The Front Side Is 35mm
Mould Type	Die or Compound Precision Steel Mold	Die or Compound Precision Steel Mold
Service Life Of The Mold	300,000 Cycles (The Service Life Of A New Mold Is 300,000 Cycles. Mold Repair Is Allowed, Except For Damage Caused By Human Factors)	300,000 Cycles (The Service Life Of A New Mold Is 300,000 Cycles. Mold Repair Is Allowed, Except For Damage Caused By Human Factors)
Preparing Mold Documentation	Two Or More Samples With Components, Plus The Product’s Gerber Or CAD Files	Two Or More Samples With Components, Plus The Product’s Gerber Or CAD Files
Operation Mode	Products Are Manually Loaded And Unloaded, While The Machine Performs Automatic Cutting	Products Are Manually Loaded And Unloaded, While The Machine Performs Automatic Cutting
Operating System	Weinview Touch Screen, With Chinese And English Interfaces	Weinview Touch Screen, With Chinese And English Interfaces
Power And Gas Cut-off Function	Have	Have
Operating Mode	Automatic Push-Pull In-and-Out Cutting for Lower Mold	Automatic Push-Pull In-and-Out Cutting for Lower Mold
Self-inspection Function	Start-up Time Monitoring, Production Capacity Monitoring, Equipment Fault Alert, and Automatic Troubleshooting Function	Start-up Time Monitoring, Production Capacity Monitoring, Equipment Fault Alert, and Automatic Troubleshooting Function
Voltage/Power Requirement	AC 220V 50HZ	AC 220V 50HZ
Pneumatic Pressure Requirement	0.6Ma,75L/min	0.6Ma,75L/min
Pipe Diameter	Φ12mm	Φ12mm
Dimensions(WDH)	7609001710mm	11509101800mm
Weight	485kg	723kg